Hydro-Control VI Touch Screen Water Control System
(11)
The Hydro-Control VI is a multiple language, touch screen, water control system . It is typically used in the concrete industry for controlling the mix cycle to automatically provide the correct addition of water in the shortest possible mixing time.
The Hydro-Control VI is a stand alone unit that can be connected to a batch control system to easily enable the transfer of mix cycle information. With features such as automatic receipe selection and a colour touch screen display the unit was designed for simplicity of use and integration into existing control systems.
Using the reading from a Hydro-Mix or Hydro-Probe Orbiter sensor installed inside a mixer, the unit accurately and continuously monitors, displays and adjusts the moisture levels of the material throughout the mix cycle. Using known recipes, the Hydro-Control VI automatically calculates and adds the correct amount of water to the mix. This ensures that the required moisture target can be easily achieved, batch after batch.
/Asset/Hydronix hydro-control VI image.jpg
Hydro-View IV Moisture Display
The Hydro-View IV is an intuitive, multi-language moisture display unit that has been designed to work with the Hydronix range of sensors. Featuring a colour touch screen, it displays real time on-line process measurements including both moisture and temperature and can display measurements from up to 4 sensors on one screen. In addition, it's simple interface provides a quick and easy method to calibrate and configure Hydronix sensors.
The Hydro-View IV can communicate with up to 16 sensors at one time and it's main page supports 1,2 or 4 screen areas, each of which is configurable to display a trend graph or numeric display of measurements from any connected sensor. This provides the user with the ability to see at a glance different measurements from either the same sensor or for up to 4 sensors without the need to change between screens.
The intuitive multi-point calibration feature of the Hydro-View enables the sensor to be easily and precisely calibrated to the material being measured. Multiple material calibrations can be stored for each sensor, allowing rapid recalculation if the material being measured is changed.
Available in both panel and wall mounting configurations, the Hydro-View may be integrated as part of a new control system or as an upgrade to an existing system
