Model VE Vertical Screw Conveyors
The VE Vertical Screw Lift System consists of a Horizontal Screw Feeder and a Vertical Screw Conveyor. The Horizontal Screw Feeder, which may feed material from a silo or hopper or simply convey it being fed by an upstream feeding device, consists of a U-shape or tubular trough in carbon steel with appropriate surface finishing. In any case the outlet zone consists of a short tubular section flanged at a right angle on the bottom section of the Vertical Screw Conveyor. A flange is welded at each end of the Horizontal Screw Feeder. The trough / tube contains a rotating screw with shaft coupling bushes at each end that are connected with the shafts of the two end bearing assemblies. The Horizontal Screw Feeder is equipped with one or more intermediate hanger bearings should its overall length require any. Furthermore, it is equipped with a drive unit suitable for the application.
The Vertical Screw Conveyor consists of a tubular housing complete with a tangential inlet in the bottom section which connects with the outlet of the Horizontal Screw Feeder, an inclined outlet spout in the top section, end flanges welded on each conveyor tube section, a rotating screw in one or more sections with shaft coupling bush at each end, a base bearing assembly complete with slide bush, and a number of intermediate hanger bearings should the overall height of the conveyor require any. The top-mounted drive unit with integrated end bearing assembly (from which the screw is suspended) and self-adjusting shaft sealing unit is suitable for the application. The VE Vertical Screw Lift System is available in a medium-heavy-duty version only.
Performance and Technical Features:
• Powder coating
• Small footprint
• Few parts subject to wear
• External tube diameter: 114mm (4.5 in), 139mm (5.5 in), 168mm (6.6 in), 193mm (7.6 in), 219mm (8.6 in), 273mm (10.7 in), 323mm (12.7 in)
• Elevation height in steps of 1 metre (3.3 ft) up to a maximum of 20 metres (65.6 ft).
• Throughput rates: between 3m³/h (1.8 cfm) and 95m³/h (56 cfm) considering the volumetric efficiency of Portland cement.
• Low maintenance
/Asset/Model VE Vertical Screw conveyor.jpg
