Smartsonic Ultrasonic Level Transmitters
(14)The SmartSonic is designed for continuous non-contact level measuring and monitoring of tanks, bins, and silos. Its transmitter features high efficiency, narrow beam design technology using a wide frequency bandwidth to enhance operation in difficult applications. It is designed to perform particularly well in harsh environments where vessel temperatures vary, using a temperature sensor to automatically compensate for temperature changes, ensuring consistent accuracy of readings. The unit's transducer uses a built-in, self-cleaning operation to eliminate buildup or condensation.
The SmartSonic is designed for continuous non-contact level measuring and monitoring of tanks, bins, and silos. Its transmitter features high efficiency, narrow beam design technology using a wide frequency bandwidth to enhance operation in difficult applications. It is designed to perform particularly well in harsh environments where vessel temperatures vary, using a temperature sensor to automatically compensate for temperature changes, ensuring consistent accuracy of readings. The unit's transducer uses a built-in, self-cleaning operation to eliminate buildup or condensation.
Features:
• Power control operation in transmitter
• Easy two-point, push-button calibration
• 4-20 mA signal output
• RS-485 communications with PC-based utility/diagnostic program
• Built-in temperature compensation
• Logarithmic receiver with very high dynamic range
• Uniform polar pattern
• Self-cleaning operation
Specifications:
• Power Requirements: AC units 115 VAC 60 Hz or 230 VAC 50 Hz; DC units 12 to 30 VDC 0.07 Amps
• Ambient Temp: -40°F to +140°F (-40°C to +60°C)
• Process Temp: Up to 200°F (93°C)
• Operation: Ultrasonic
• Frequency: 25 to 148 KHz
• Measurement Range Liquids: 90’ maximum
• Measurement Range Solids: 40’ maximum
• Accuracy: ± 0.25%
• Beam Angle: 6° - 12° conical at –3dB
• Temp Compensation: Continuous in transducer
• Output: 4-20 mA and RS-485
• Mounting: 3” NPT
• Enclosure: PVC-94VO
• Approvals & Certifications: NEMA 4X (IP65)
Applications:
• Continuous, non-contact level monitoring of tanks, bins and silos
• Narrow beam design using a wide frequency bandwidth to enhance operation in difficult applications
• Smart signal processing to eliminate unwanted echoes
• Measuring range from 4 inches up to 90 feet
• Liquids, plastics, grain, sand, aggregates and many more applications
Smartsonic Sanitary Ultrasonic Level Transmitters
(8)The SmartSonic is designed for continuous non-contact level measuring and monitoring of tanks, bins, and silos. Its transmitter features high efficiency, narrow beam design technology using a wide frequency bandwidth to enhance operation in difficult applications. It is designed to perform particularly well in harsh environments where vessel temperatures vary, using a temperature sensor to automatically compensate for temperature changes, ensuring consistent accuracy of readings. The unit's transducer uses a built-in, self-cleaning operation to eliminate buildup or condensation.
The SmartSonic is designed for continuous non-contact level measuring and monitoring of tanks, bins, and silos. Its transmitter features high efficiency, narrow beam design technology using a wide frequency bandwidth to enhance operation in difficult applications. It is designed to perform particularly well in harsh environments where vessel temperatures vary, using a temperature sensor to automatically compensate for temperature changes, ensuring consistent accuracy of readings. The unit's transducer uses a built-in, self-cleaning operation to eliminate buildup or condensation.
Features:
• Power control operation in transmitter
• Easy two-point, push-button calibration
• 4-20 mA signal output
• RS-485 communications with PC-based utility/diagnostic program
• Built-in temperature compensation
• Logarithmic receiver with very high dynamic range
• Uniform polar pattern
• Self-cleaning operation
Specifications:
• Power Requirements: AC units 115 VAC 60 Hz or 230 VAC 50 Hz; DC units 12 to 30 VDC 0.07 Amps
• Ambient Temp: -40°F to +140°F (-40°C to +60°C)
• Process Temp: Up to 200°F (93°C)
• Operation: Ultrasonic
• Frequency: 25 to 148 KHz
• Measurement Range Liquids: 90’ maximum
• Measurement Range Solids: 40’ maximum
• Accuracy: ± 0.25%
• Beam Angle: 6° - 12° conical at –3dB
• Temp Compensation: Continuous in transducer
• Output: 4-20 mA and RS-485
• Mounting: 3” NPT
• Enclosure: PVC-94VO
• Approvals & Certifications: NEMA 4X (IP65)
Applications:
• Continuous, non-contact level monitoring of tanks, bins and silos
• Narrow beam design using a wide frequency bandwidth to enhance operation in difficult applications
• Smart signal processing to eliminate unwanted echoes
• Measuring range from 4 inches up to 90 feet
• Liquids, plastics, grain, sand, aggregates and many more applications
Smartsonic Mini Ultrasonic Level Transmitters
(3)The SmartSonic is designed for continuous non-contact level measuring and monitoring of tanks, bins, and silos. Its transmitter features high efficiency, narrow beam design technology using a wide frequency bandwidth to enhance operation in difficult applications. It is designed to perform particularly well in harsh environments where vessel temperatures vary, using a temperature sensor to automatically compensate for temperature changes, ensuring consistent accuracy of readings. The unit's transducer uses a built-in, self-cleaning operation to eliminate buildup or condensation.
The SmartSonic is designed for continuous non-contact level measuring and monitoring of tanks, bins, and silos. Its transmitter features high efficiency, narrow beam design technology using a wide frequency bandwidth to enhance operation in difficult applications. It is designed to perform particularly well in harsh environments where vessel temperatures vary, using a temperature sensor to automatically compensate for temperature changes, ensuring consistent accuracy of readings. The unit's transducer uses a built-in, self-cleaning operation to eliminate buildup or condensation.
Features:
• Power control operation in transmitter
• Easy two-point, push-button calibration
• 4-20 mA signal output
• RS-485 communications with PC-based utility/diagnostic program
• Built-in temperature compensation
• Logarithmic receiver with very high dynamic range
• Uniform polar pattern
• Self-cleaning operation
Specifications:
• Power Requirements: AC units 115 VAC 60 Hz or 230 VAC 50 Hz; DC units 12 to 30 VDC 0.07 Amps
• Ambient Temp: -40°F to +140°F (-40°C to +60°C)
• Process Temp: Up to 200°F (93°C)
• Operation: Ultrasonic
• Frequency: 25 to 148 KHz
• Measurement Range Liquids: 90’ maximum
• Measurement Range Solids: 40’ maximum
• Accuracy: ± 0.25%
• Beam Angle: 6° - 12° conical at –3dB
• Temp Compensation: Continuous in transducer
• Output: 4-20 mA and RS-485
• Mounting: 3” NPT
• Enclosure: PVC-94VO
• Approvals & Certifications: NEMA 4X (IP65)
Applications:
• Continuous, non-contact level monitoring of tanks, bins and silos
• Narrow beam design using a wide frequency bandwidth to enhance operation in difficult applications
• Smart signal processing to eliminate unwanted echoes
• Measuring range from 4 inches up to 90 feet
• Liquids, plastics, grain, sand, aggregates and many more applications
Smartsonic Two Wire Ultrasonic Level Transmitters
(6)The SmartSonic is designed for continuous non-contact level measuring and monitoring of tanks, bins, and silos. Its transmitter features high efficiency, narrow beam design technology using a wide frequency bandwidth to enhance operation in difficult applications. It is designed to perform particularly well in harsh environments where vessel temperatures vary, using a temperature sensor to automatically compensate for temperature changes, ensuring consistent accuracy of readings. The unit's transducer uses a built-in, self-cleaning operation to eliminate buildup or condensation.
The SmartSonic is designed for continuous non-contact level measuring and monitoring of tanks, bins, and silos. Its transmitter features high efficiency, narrow beam design technology using a wide frequency bandwidth to enhance operation in difficult applications. It is designed to perform particularly well in harsh environments where vessel temperatures vary, using a temperature sensor to automatically compensate for temperature changes, ensuring consistent accuracy of readings. The unit's transducer uses a built-in, self-cleaning operation to eliminate buildup or condensation.
Features:
• Power control operation in transmitter
• Easy two-point, push-button calibration
• 4-20 mA signal output
• RS-485 communications with PC-based utility/diagnostic program
• Built-in temperature compensation
• Logarithmic receiver with very high dynamic range
• Uniform polar pattern
• Self-cleaning operation
Specifications:
• Power Requirements: AC units 115 VAC 60 Hz or 230 VAC 50 Hz; DC units 12 to 30 VDC 0.07 Amps
• Ambient Temp: -40°F to +140°F (-40°C to +60°C)
• Process Temp: Up to 200°F (93°C)
• Operation: Ultrasonic
• Frequency: 25 to 148 KHz
• Measurement Range Liquids: 90’ maximum
• Measurement Range Solids: 40’ maximum
• Accuracy: ± 0.25%
• Beam Angle: 6° - 12° conical at –3dB
• Temp Compensation: Continuous in transducer
• Output: 4-20 mA and RS-485
• Mounting: 3” NPT
• Enclosure: PVC-94VO
• Approvals & Certifications: NEMA 4X (IP65)
Applications:
• Continuous, non-contact level monitoring of tanks, bins and silos
• Narrow beam design using a wide frequency bandwidth to enhance operation in difficult applications
• Smart signal processing to eliminate unwanted echoes
• Measuring range from 4 inches up to 90 feet
• Liquids, plastics, grain, sand, aggregates and many more applications
