JEC Products & Systems............................................ Bulk Tanker Blowers Butterfly Valves & ActuatorsConcrete Batch PlantsConcrete Plant AutomationContinuous MixersConveyor AccessoriesConveyor ProductsDust Control SystemsHopper Car Unloading SystemsHose and FittingsLevel IndicationMetal Fiber DispensersMotion ControlsOverhead DistributionSystemsPiggyback Hopper FramePillow BlockPlanetary MixersPost Drivers & Post PullersRadio Remote ControlScales and Load CellsSilo & Silo AccessoriesSilo Aeration ProductsSilo Anti-Overfill SystemsSolenoid Valves, Air Cylinders & Airline Accessories Ticket Delivery SystemTurbine MixersTwin Shaft MixersVibrating ScreensVibratorsWater Meters, Water Heaters/Chillers & Steam Generators JEC Services............................................Plant & System AssemblyField Services Engineered Retrofits
Check up to five results to perform an action.
The SmartBob2 SS sensor option is a proven solution when the requirement is to measure the level of solid material below a liquid surface, such as in brine interface applications. It can be used in tanks where solid material settles at the bottom of a tank, such as for measuring the level of settled salt, sediment, sand or metals under water. The SmartBob SS is an excellent alternative to relying on sight tubes and can be used in any application where solid material needs to be measured under liquid. Examples include water treatment, wastewater facilities, food processing, petroleum refining, chemical processing, and salt and metal mining.
The SmartBob-SS sensor drops a weighted Bob through the liquid; when the Bob comes into contact with solid settled material at the bottom of the tank, it retracts and sends a measurement to a SmartBob control console or a PC loaded with eBob software. The SmartBob-SS sensor’s special design comes configured with a 3-inch standpipe for ease of installation, a stainless steel cable that stands up to corrosive materials, and a SureDrop cap that prevents the weight from being retracted into the pipe and protects the device from unwanted material entering through the standpipe.
Features:• Standard air purge fitting that can be plumbed to add dry air and help keep the sensor cavity dry stainless steel,• Teflon-jacketed cable or a durable nylon cable with stainless fittings that stands up to corrosive materials• Sends data to C-100 control console or PC loaded with eBob software• Standard 4-20 analog output can send data directly to existing control system from the C-100
Specifications:• Power Requirements: 115/230 VAC 50/60 Hz• Ambient Temp: -40°F to +185°F (-40°C to +85°C)• Process Temp: Up to 500°F (260°C)• Measurement Range: Up to 60’• Measurement Rate: 2 feet per second• Accuracy: ± 0.25% distance measurement accuracy• Mounting: 3”- 8” NPT• Enclosure: Molded polycarbonate• Approvals & Certifications: Listed for Class II, Groups E, F, & G Hazardous Locations• Enclosure Type: NEMA 4X, 5, 9 & 12
Applications:• Measuring the level of solid material below a liquid surface• Brine interface applications • Measuring the level of settled salt, sediment, sand or metals under water• Alternative to relying on sight tubes • Water treatment, wastewater facilities, food processing, petroleum refining, chemical processing, salt and metal mining
