Search Catalog
      GO   
 All Categories    Model RS Safety Stop Switch
All Categories > Conveyors and Conveyor Products > Conveyor Components > Conveyor Safety Products > Conveyor Safety Stop Switches > Model RS Safety Stop Switch > Model RS Safety Stop Switch > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model RS Safety Stop Switch

Check up to five results to perform an action.


The Model RS is a heavy-duty safety control that provides a positive shut off of dangerous equipment in an emergency. A cable pulled by endangered personnel actuates the control. The output contacts of the Model RS-2 can control up to two separate circuits, one for machinery shutdown and one for an alarm.


Safety minded operators of conveyors, production lines, elevator equipment, assembly lines, material handling systems, cranes, etc. consider it a must for employee protection. Most states have safety statutes that require these switches on conveyors and related equipment. American National Standard Institute recommends their use in ANSI standard No. ASME B20.1-1993-5.11.


Technical Specifications:
• The housing is cast aluminum, with optional epoxy or polyester coatings available. These coatings will provide protection against corrosion that is equal or greater than cast iron.
• The unit is actuated by a cable pulled from either or both directions on every unit; in other words, the unit is "double ended".
• The unit is mounted with three (3) 3/8" bolts on the conveyor by drilling (3) 13/32" diameter holes. Please see Installation Instructions.
• General purpose (weatherproof) units have (3) 3/4" NPT conduit openings.
• Explosion proof units have (1) 3/4" NPT conduit opening.
• The standard units have dry, unpowered SP/DT microswitch(es) rated for 20A @ 120 VAC, 240VAC, and 480 VAC; 1/2 amp at 125 VDC and 1/4 amp at 250 VDC.
• The operating temperature range is -40ºF (-40ºC) to 150ºF (65ºC).
• The general purpose units are rated NEMA 4/4X weatherproof and corrosion-resistant. Explosionproof units are rated NEMA 7/9 for dust ignitionproof and vapor explosion proof. The dual-rated "D" units are rated NEMA 4 weatherproof and NEMA 9 dust ignitionproof.
• The general-purpose controls are IP65 compliant.
• Most models are UL listed and CSA certified.






 DOWNLOADS 

RS Safety Stop Catalog
(PDF, 1006KB)



 Customers also viewed... 


polyurethane belt skirting
Polyurethane Belt Skirting


CHCO series conveyor covers image
CHCO Series Conveyor Covers

more available ..


 Customers also viewed... 


Standard Telescoper Takeup
Standard Telescoper Takeups


Douglas Standard heavy duty drum pulleys
Standard Heavy Duty Drum Pulleys

more available ..

Compare Items
   
  Results 1 - 9 of 9 1 

Item #

Description

Shipping Weight

Certifications

RS-1 One SP/DT micro switch 12 lb ISO 9001
RS-2 Two SP/DT micro switches 12 lb ISO 9001
RS-2L Two SP/DT micro switches with Light 13 lb ISO 9001
RS-1X Explosion Proof with one SP/DT micro switch - No Light (for NEMA 7 and 9) 12 lb ISO 9001
RS-2X Explosion Proof with Two SP/DT micro Switches - No Light (for NEMA 7 and 9) 12 lb ISO 9001
RSB-1 One SP/DT switch w/ cable break detection N/A lb ISO 9001
RSB-2 Two SP/DT switches w/ cable break detection N/A lb ISO 9001
RSB-1X Explosion Proof with 1 SP/DT switch and cable break detection N/A lb ISO 9001
RSB-2X Explosion Proof with 1 SP/DT switch and cable break detection N/A lb ISO 9001
  Results 1 - 9 of 9 1