Search Catalog
      GO   
 All Categories    Model AD Bin Aerators
All Categories > Aeration > Silo & Bin Aeration Products > Model AD Bin Aerators > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Model AD Bin Aerators

Check up to five results to perform an action.


The Model AD is an aeration pad or diffuser that is used to provide a means of introducing low pressure air into a dry bulk material that has become compacted due to settling. The air will help restore the material's natural ability to flow.


The Model AD aeration pad helps restore material flow without the sometimes damaging effects of vibration or more expensive and complicated flow systems. The pads use a minimum amount of air (typically 6.5 cfm at 3 psi).


Technical Specifications:
• The standard material of construction includes a zinc plated steel body with galvanized steel mesh and a cotton diffuser.
• Standard units have a temperature rating of 200°F (93ºC).
• The high temperature version's materials of construction includes a zinc plated steel body with a galvanized steel mesh and a fiberglass diffuser.
• Fiberglass diffuser units have a temperature rating of 600°F (315ºC).
• The unit is mounted on the bin wall by drilling a 7/16" diameter hole to allow the pipe nipple to pass through. Tank nipple connection is 1/8" NPS.
• Optional "external mounting kits" install using a 2-5/8" x 6-3/8" cutout on the bin wall. The installer does not need to enter the bin or vessel.
• Both the cotton diffuser and fiberglass diffuser are available with 316 S.S. body and mesh
 






 DOWNLOADS 

Model AD Aeration Pad Brochure
(PDF, 493KB)

Model AD Aeration Pads Manual
(PDF, 358KB)

Model AD-C & AD-F Aeration Pad Drawing
(PDF, 20KB)

Model AD-K External Mounting Kit Drawing
(PDF, 86KB)

Model AD-SSC & AD-SSF Aeration Pad Drawing
(PDF, 20KB)

Compare Items
   
  Results 1 - 12 of 12 1 

Item #

Description

AD-C Zinc plated steel body with galvanized steel mesh and cotton diffuser. With brass nipple and lock nut, stainless steel spacer washers, and rubber sealing gasket.
AD-F Fiberglass diffuser. With brass nipple and lock nut, stainless steel spacer washers, and rubber sealing gasket. Recommended when temperatures exceed 200°F (600°F max).
AD-SSC Type 316 stainless steel body and mesh with cotton diffuser. With stainless steel spacer washers, nickel plated nipple and lock nut, and rubber sealing gasket.
AD-SSF Fberglass diffuser. With stainless steel spacer washers, nickel plated nipple and lock nut, and rubber sealing gasket. Recommended when temperatures exceed 200°F (600°F max).
AD-K Optional mounting kit includes two positive sealing gaskets, adapter, and clamp. Use with any of the above aerators when mounting from outside the bin.
AD-K-2 Clamp for Model AD Bin Aerator
ADK-3 Thick Gasket for Model AD Bin Aerator
ADK-4 Thin Gasket for Model AD Bin Aerator
AD-5 Brass Nipple for Model AD Bin Aerator
AD-6 Brass Nut for Model AD Bin Aerator
AD-9 Washer for Model AD Bin Aerator
AD-10 Rubber Washer for Model AD Bin Aerator
  Results 1 - 12 of 12 1