The CVR-625 is a compact vibrating rod that is ideal for small bins, hoppers, and feeders. Featuring an overall insertion length of just six inches, it is suitable for space-constrained applications. It can be mounted on the top or side of the bin for high, medium and low level indications. It is easy to install, fitting through a standard 1-1/4" NPT mounting socket and can be used in process temperatures up to 300ºF. The CVR-625 vibrating rod principle overcomes difficulties associated with changes in dielectric constant, humidity, temperature, and material density.


It features three sensitivity adjustments – high for light and fluffy materials, medium, and low for heavier materials or materials that may tend to cling to the vibrating rod. The rod can be used to detect very light materials with a bulk density as low as 2. It requires no calibration and features a self-cleaning sensor, switch selectable high/low fail-safe, and an auto sensing power supply which can accommodate 20 – 250 volts AC/DC. Remote electronics via a point level alarm panel are available to alert to bin levels for four up to 24 individual sensors.


Features:
• Compact design ideal for small bins, hoppers, and feeders
• Single rod design
• No calibration required
• Wear and maintenance free
• No moving parts
• High and low level fail-safe
• Three sensitivity adjustments
• Universal power supply
• Self-cleaning sensor
• 1-1/4” NPT mounting
• 6” insertion length
• Remote electronics available
• Process temperatures up to 300ºF


Applications:

• Compact design for reliable point level sensing in small bins and hoppers that contain plastics, food, seed, chemicals, and many other powder and bulk solid materials
• Material densities from 2.0 lb./cu. ft.

1 - 2 of 2 | Results Per Page | View |
1 

Item #

Power Requirements

Power Consumption

Relay

Time Delay

Ambient Temperature

Process Temperature

Pressure

Wiring Cable

Mounting

Enclosure

Probe

Material Density

N/A Wide range 20-250V AC/DC N/A 3 VA N/A SPDT 5A 250 VAC N/A 1 second from stop of vibration, 2 to 5 sec for start of vibration N/A -4°F to +150°F (-40C to +65°C) N/A to 176°F standard (80°C); to 300°F high temp (150°C) N/A 145 psi N/A 1/2" N/A 1-1/4" NPT N/A Powder coated diecast aluminum NEMA 4 N/A 304 stainless steel, 6" insertion length N/A from 2.0 lb./cu. ft.
N/A Wide range 20-250V AC/DC N/A 3 VA N/A SPDT 5A 250 VAC N/A 1 second from stop of vibration, 2 to 5 sec for start of vibration N/A -4°F to +150°F (-40C to +65°C) N/A to 176°F standard (80°C); to 300°F high temp (150°C) N/A 145 psi N/A 1/2" N/A 1-1/4" NPT N/A Powder coated diecast aluminum NEMA 4 N/A 304 stainless steel, 6" insertion length N/A from 2.0 lb./cu. ft.
1 - 2 of 2 | Results Per Page | View |
1