• RL30745 Single-Ended Beam, Stainless Steel

 

This stainless steel, welded-seal single-ended beam provides excellent protection against corrosive and washdown environments. This model is also a direct replacement cell for the Mettler-Toledo® 745 Mount. It is ideally suited for low-profile platforms and vessel weighing. Available in capacities from 500 to 10,000 lb (226.8 to 4535.9 kg). Complete witheither 15' or 30'/6.1 m of load cell cable

1 - 10 of 10 | Results Per Page | View |
1 
Request Information Compare Items

Item #

Load Rating

Full Scale Output

Bridge Resistance

Material/Finish

Seal Type

N/A 500 lbs. N/A 2.0 mV/V N/A 350 ohms, nominal N/A Stainless steel N/A Welded-seal, IP67
N/A 1250 lbs. N/A 2.0 mV/V N/A 350 ohms, nominal N/A Stainless steel N/A Welded-seal, IP67
N/A 2500 lbs. N/A 2.0 mV/V N/A 350 ohms, nominal N/A Stainless steel N/A Welded-seal, IP67
N/A 5000 lbs. N/A 2.0 mV/V N/A 350 ohms, nominal N/A Stainless steel N/A Welded-seal, IP67
N/A 10,000 lbs. N/A 2.0 mV/V N/A 350 ohms, nominal N/A Stainless steel N/A Welded-seal, IP67
N/A 500 lbs. N/A 2.0 mV/V N/A 350 ohms, nominal N/A Stainless steel N/A Welded-seal, IP67
N/A 1250 lbs. N/A 2.0 mV/V N/A 350 ohms, nominal N/A Stainless steel N/A Welded-seal, IP67
N/A 2500 lbs. N/A 2.0 mV/V N/A 350 ohms, nominal N/A Stainless steel N/A Welded-seal, IP67
N/A 5000 lbs. N/A 2.0 mV/V N/A 350 ohms, nominal N/A Stainless steel N/A Welded-seal, IP67
N/A 10,000 lbs. N/A 2.0 mV/V N/A 350 ohms, nominal N/A Stainless steel N/A Welded-seal, IP67
1 - 10 of 10 | Results Per Page | View |
1