The Super-G’s unique “pass-through” mainframe design allows material to freely fall through it, keeping your systems online with little to no maintenance. This system is based on the same heavy duty mainframe and Perma-Torque tensioner as our Eraser system. The urethane cartridge holds the 6” tungsten-tipped blades, which allows the blades to flex with and maintain contact and pressure against the belt.

Benefits:
• Effective performance for wet, sticky secondary cleaning applications
• Solid urethane cleaning blades also available
• The Perma-Torque™ internal central tensioner is adjustable from 20 to 80 ft-lb (27 to 108 Nm) resulting in uniform cleaning pressure to the conveyor belt
• Compact mounting footprint only protrudes 5” (127 mm) from mounting structure
• Brightly colored safety yellow end caps seal the Safe Torque™ ratchet from dust and water contamination
• Single pin blade attachment means quick and simple blade change out


Recommended Belt Speeds:
• Urethane Blade: 0 – 500 fpm (2.54 m/s)
• Tungsten Blade: 0 – 1000 fpm (5.08 m/s)

Mounting Distance:
• Vertical: 7.5” ± .25 (190 mm ± 6)
• Horizontal: up to 16” (406 mm)

Specifications

Type

N/A Secondary Belt Cleaner

Recommended Belt Speeds

N/A Tungsten Blade: 0 – 1000 fpm (5.08 m/s)

Blade Type

N/A Tungsten

(A) Inch

N/A 54.00

Min. B (inches)

N/A 55.00

Max. B (inches)

N/A 70.00

Min. C (inches)

N/A 0.50

Max. C (inches)

N/A 8.00

Manufacturer

N/A Argonics