RVS Blow-Through Rotary Valves consist of a tubular cast iron or stainless steel casing, a horizontally mounted rotor with a certain number of oblique V-shaped cross section compartments, a drive unit and a casing cover at each end.


Two compartments at a time of the continuously turning rotor are filled up with material through the inlet at the top of the Rotary Valve. After less than half a turn the material falls through the bottom opening into an air stream passing through a pneumatic conveying pipeline connected with the bottom part of the Rotary Valve.


Performance and Technical Features:
• Available in ATEX zone 22 version
• Robust and compact design
• Rotor: integral with beveled blades, with scrapers (Viton®, Vulkolan, Teflon®)
• Fixed rotor speed: 10 / 20 / 30 r.p.m.
• Variable rotor speed: 4 ¿ 22 r.p.m.
• Rotor surface treatment: nickel plating, Teflon® coating, hardened blades
• Casing: cast iron or 304 / 316 stainles steel
• Casing surface treatment: nickel plating, Teflon® coating
• Drives: direct with gear motor, with variable speed gear motor, coaxial with chain transmission, bare shafted without drive
• Easy access to all internal mechanical parts

Specifications

Q 1 (mm)

N/A 1198

Q 2 (mm)

N/A 747

Q 3 (mm)

N/A 451

R 1 (mm)

N/A 1165

R 2 (mm)

N/A 277

R 3 (mm)

N/A 888

H (mm)

N/A 677

kW

N/A 2.2

E-Motor RPM

N/A 1400

Variator RPM

N/A 190-1000

Rotor RPM

N/A 4-20

Manufacturer

N/A WAM