The Vaporator™ Series is the highest quality steam generator available for concrete curing. Designed to incorporate the latest proven advances in combustion, electronics and automation engineering, the Vaporator™ is the premium direct-fired steam generator available from VAPOR ENRGY™ USA. The VAPORATOR™ SERIES is available as multi-speed units in sizes ranging from 1.0 to 8.0 million BTU/Hr in order to meet the needs of even the largest and most complex concrete curing operations.
Additional Features:
• 98% Fuel Efficient
• 35-40% Fuel Avoidance
• On-Demand Steam Production
• Low Pressure Operation
• PLC Controlled
• High Early Compression Strengths
Unit of Measure
Specifications
Output of Unit (MM BTU/HR) |
N/A 1.50/3.0 |
Max. Steam |
N/A 3000 lb/hr |
Boiler Equivalent |
N/A 90HP |
Length |
N/A 112 |
Width |
N/A 52 |
Height |
N/A 90 |
Air Blower Type |
N/A Positive Displacement |
Electric Motor Power |
N/A 40 hp |
Mixer/Burner Type |
N/A Premix 3.0 MMBTU |
Shipping Weight |
N/A 2700 lb |
Water Hardness |
N/A <3 Grains/Gal. |
Manufacturer |
N/A Kemco Systems |
Utility Requirements & Connection
Natural Gas (at 12 PSIG) |
N/A 3000 ft³/h |
Propane (vaporized at 12 PSIG) |
N/A 33 gph |
Power Supply |
N/A 240/480 VAC at 60 Hz, 3-phase |
Current |
N/A 134/67 A |
Water (at 40 PSIG) |
N/A 6 gpm |
Fuel Connection |
N/A 1 1/4 in |
Water Connection |
N/A 3/4 in |
Steam Line Connection |
N/A 5 in |
