Products Catalog

The ECS (Muffler- Reclassifier) eliminates unwanted oil mist and reduces exhaust noise from pneumatic valves, cylinders and air motors.

Features:
• 99.97% Oil removal efficiencies.
• 25 dBA Noise attenuation.
• 1/2" NPT and 1" NPT.
• Disposable units.
• Continuous or plugged drain option.
• Metal retained construction.
• Fast exhaust time.
• Maximum operating temperature : 125°F (52°C)
• Maximum line pressure : 100 PSIG (6.9 bar)

The Auto Pilot Soft Start valve gives the advantage of an individual soft start valve without the quick dump operation for custom applications.This new soft start valve can be piped into your system allowing gradual filling of the downstream pressure during system start up. When the downstream pressure reaches approximately 60% of the supply pressure, the main valve opens giving a soft start upfor equipment protection.

Features:
• Smooth start-up of pneumatic system
• Automatic air pilot operation
• Large flow capacities up to 5.5 Cv
• Inline or Modular Mounting

Muffler / filters effectively reduce air exhaust noises to an industry accepted level with minimum flow restriction. They protect valves, impact wrenches, screw drivers and other air tools by preventing dirt and other foreign matter from entering the system. Non-corrosive. Can be cleaned with many common solvents.

Specifications:
• Maximum Operating Pressure: 250 PSIG (Air)
• Operating Temperature: 0° to 300°F

These low silhouette versions of the muffler / filter are useful where space is a problem and / or to prevent contamination. Use for vacuum relief or pressure equalization in gear boxes, oil tanks, reservoirs, etc. Non-corrosive. The silencer is designed to give superior performance in noise control with a minimum effect on air efficiency. “Trimline” design allows location in the tightest places without extra plumbing and fittings. Fits directly into the exhaust port of more than 90% of present commercial valves. Slotted body permits rapid discharge of air without undesirable back pressure. Unique nylon screen element resists dirt buildup or clogging.

Specifications:
• Maximum Operating Pressure: 250 PSIG (Air)
• Operating Temperature: 0° to 300°F

Specifications:
• Operating media - clean, dry, compressed air
• 1/4" to 2" ports, NPT and BSPP
• Aluminum (LV and EZ) or Stainless Steel material (LVSS)
• 15 to 300 PSI (compact series only up to 145 PSI)
• 40°F to 175°F (stainless steel version 30°F to 175°F)

Features:
• Helps ensure a machine meets OSHA 190.147 standards for energy isolation during maintenance
• Meets ANSI B11.0 and B11.TR6 requirements for an energy isolation device
• Meets PMMI B155.1 requirements for an energy isolation device
• Exhaust port equal to or larger than supply port
• Fast exhaust means less downtime during maintenance cycle
• Visual verification of line exhaust with "pop-up" indicator
• 3 body sizes (Compact, Standard, High Flow) to fit different application requirements

Muffler / flow controls provide an acceptable exhaust noise level and effectively meter exhaust. Installed in valve exhaust ports, they control cylinder piston speeds throughout a wide range. The adjusting screw cannot be accidently blown out, can be locked to maintain setting. Brass and bronze construction. Clean with commonly used solvents.

Specifications:
• Maximum Operating Pressure: 250 PSIG (Air)
• Operating Temperature: 0° to 300°F

The pressure switch monitors the air pressure in your pneumatic system. When the pressure in your system either drops below or exceeds the set point pressure, an electrical output is given.

Quick exhaust valves provide rapid exhaust of control air when placed between control valve and actuator. They can also be used as shuttle valves. Diaphragm materials are available in urethane, Nitrile, Fluorocarbon, and PTFE to meet a wide variety of operating conditions.

Specifications:
• Maximum Operating Pressure (Air): 150 PSIG / 200 PSIG for Model No. 0R37TB (PTFE diaphragm)
• Minimum Operating Pressure (Air):3 PSIG / 50 PSIG for Model No. 0R37TB (PTFE diaphragm)

Operating Temperature:
• Urethane: 0°F to 180°F* (-18°C to 80°C)
• Nitrile: 0°F to 180°F* (-18°C to 80°C)
• Fluorocarbon: 0°F to 400°F* (-18°C to 205°C)
• PTFE: 0°F to 500°F* (-18°C to 260°C)

Component Materials:
• Body Material:  Die cast aluminum
• Static Seals:  Nitrile standard with urethane
• Diaphragm:  Standard – Urethane

The Solenoid Quick Dump Valves gives the advantage of an individual quick dump valve without the soft start operation for custom applications. This new quick dump valve can be piped into your system allowing a quick exhaust of the downstream air when the solenoid is de-energized. This valve is capable of exhaust flows up to 5.7 Cv.

Features:
• Shuts off incoming pressure while rapidly exhausting downstream pressure
• Large exhaust flow capacities up to 5.7 Cv
• Solenoid operation
• Non-locking manual override

The SPF Series Flow Control Valves meter flow of air or oil in one direction and allow free flow in the reverse direction. SPF Series valves are manufactured with a two step needle. Fine metering is accomplished over the initial adjustment turns and nominal metering is provided over the remaining turns. Once the desired flow is selected, a set screw can be tightened to maintain the setting. These valves are available with NPTF ports in 1/8", 1/4", 3/8" and 1/2" sizes.

Valve Specifications:
• Maximum Operating Pressure:  2000 PSI Non-Shock
• Operating Temperature: 0° to 140°F

Component Materials:
• Body Material:  Brass
• Needle:  Stainless Steel
• Poppet:  Stainless Steel
• Poppet Style:  Soft Seal Standard
• Check Retainer:  Stainless Steel
• Seals:  Nitrile (Standard). Fluorocarbon (Optional)
• Knob: Steel with Zinc Plating
• Spring:  Stainless Steel