C&W offers AirMac's Aeration Blowers to ventilate stagnate silos. Select from either 3 horsepower or 5 horsepower, both equipped with a F-64 inlet filter and 3M Sutorbilt motor. C&W offers a 5 HP Blower with 140 CFM which can operate up to 5 PSIG, and a 3 HP Blower with 90 CFM which can operate up to 4 PSIG.
Both units are fabricated on a steel frame and include a coupling, 2" check valve, spring style 2" relief valve, and an inlet filter silencer. C&W Aeration Blowers are mounted on a steel base and are painted industrial gray with an orange belt guard.
An optional Electrical Control Panel is available and may be ordered separately. The panel includes a quick disconnect, motor starter, manual on/off switch, run light on the face of the unit, and connect point for remote start/stop.
Item # |
Blower HP |
Blower CFM |
Type of Motor |
Motor RPM's |
Max Relief Setting |
Approx. Weight (lbs.) |
Aeration Pad Capacity |
---|---|---|---|---|---|---|---|
AMDD082 AMDD082/Asset/CW 3 and 5 HP Blowers.jpg | Blower HP N/A 3 | Blower CFM N/A 90 | Type of Motor N/A 3M Sutorbilt | Motor RPM's N/A 2020 | Max Relief Setting N/A 4 PSIG | Approx. Weight (lbs.) N/A 400 | Aeration Pad Capacity N/A 18 |
AMDD081 AMDD081/Asset/CW 3 and 5 HP Blowers.jpg | Blower HP N/A 5 | Blower CFM N/A 140 | Type of Motor N/A 3M Sutorbilt | Motor RPM's N/A 3020 | Max Relief Setting N/A 5 PSIG | Approx. Weight (lbs.) N/A 430 | Aeration Pad Capacity N/A 28 |