The C&W AirMac™ Automatic Transfer System Package gives you an efficient method of conveying a wide variety of bulk dry materials. The AirMac™ transfer system package is made up of the AirMac™ Blower Package PLUS a rotary vane feeder, adjustable slide gate, blow-through box, electrical control panel, bin adapter, bin indicators, and transfer line to give you a complete transfer system!

Standard Equipment:

Adjustable Slide Gate:
Slide gate features a wheel handle with ball bearings for adjustment. Constructed of steel c-channel.


AMDD Blower Package Includes all the standard equipment of the AirMac blower package, including motor/blower, direct drive, inlet filter, check and relief valves, pressure gauge, and the steel base.


Blow-Through Box: Allows efficient transfer of material from the rotary vane feeder into the transfer line. Includes all necessary mounting hardware.


Electrical Control Panel: Available for 220 V or 440 V, our control panel is housed in a NEMA 3R weatherproof cabinet. It features a main fused quick disconnect, transformer, sequential


Rotary Vane Feeder: Rotary vane feeder features a hardened, chrome-plated, gray cast iron inner body, gray cast iron end plates, and a cast iron rotor with tips. (Size based on desired material transfer rate) Air Purge System included for longer bearing life.

1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 

Item #

Power

Transfer per Hour

Vane Feeder

N/A 20 hp N/A 5-10 N/A 8 in
N/A 20 hp N/A 10-12 N/A 10 in
N/A 30 hp N/A 13-19 N/A 12 in
N/A 40 hp N/A 20-24 N/A 14 in
N/A 50 hp N/A 20-25 N/A 14 in
N/A 60 hp N/A 31-39 N/A 14 in
N/A 75 hp N/A 40-49 N/A 14 in
N/A 75 hp N/A 41-54 N/A 16 in
N/A 60 hp N/A 36-40 N/A 16 in
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1