Nordfab’s XD Angle Flange Adapter is fitted with an industry standard Angle Flange on one end and a Quick-Fit (QF) rolled edge at the other, allowing quick connection of XD 14 gauge duct pipe / fittings to flanged pipes / fittings.

If a custom hole pattern is required, specify a Flat Flange (FFL) instead of an Angle Flange (ANGFL) and provide the hole pattern. If no hole pattern drawing provided, flat flange will be blank.

Flanges are retained with a Van Stone lip.

1 - 14 of 14 | Results Per Page | View |
1 

Item #

Ø (in)

Length (in)

Weight (lbs.)

4250-0800 N/A 8 N/A 3.5 N/A 3.15
4250-0900 N/A 9 N/A 3.5 N/A 3.25
4250-1000 N/A 10 N/A 3.5 N/A 5.00
4250-1100 N/A 11 N/A 3.5 N/A 5.60
4250-1200 N/A 12 N/A 3.5 N/A 6.15
4250-1300 N/A 13 N/A 5 N/A 7.02
4250-1400 N/A 14 N/A 5 N/A 7.70
4250-1500 N/A 15 N/A 5 N/A 9.25
4250-1600 N/A 16 N/A 5 N/A 11.05
4250-1700 N/A 17 N/A 5 N/A 12.90
4250-1800 N/A 18 N/A 5 N/A 15.20
4250-2000 N/A 20 N/A 5 N/A 19.15
4250-2200 N/A 22 N/A 5 N/A 26.05
4250-2400 N/A 24 N/A 5 N/A 30.00
1 - 14 of 14 | Results Per Page | View |
1