Boot-Lift® Railcar Connector improves the speed and safety of connecting a hopper car to under-track systems, without workers crawling under the car, and without losing material to wind or contamination.


Features and Benefits:
• Boot prevents material loss, air pollution and contamination.
• Boots are automatically connected.
• Connector rises as railcar empties.
• Unit uses only 10 cfm at 90 psi (28 l/min. at 6.2 bar).
• Including double- or single-pocket, round-opening and GATX. Adapter plates allow interchangeability.


Options:
• Manual Aligner - simplifies car positioning by allowing adjustment of the Boot-Lift® Railcar Connector up to six inches (152 mm) total—three inches (76 mm) in either direction—along the track.
• Pneumatic Aligner - air-powered aligner provides eight inches (203 mm) of total adjustment—four inches (102 mm) in either direction—along the track. Remote control operation requires only 10 psi (0.7 bar) of air.

1 - 5 of 5 | Results Per Page | View |
1 

Model

(A) Inch

(B) Inch - Extended

(B) Inch - Retracted

(C) Inch

(D) Inch

(E) Inch

(F) Inch - Funnel Opening

N/A 57 N/A 18.5 N/A 4.50 N/A 42.26 N/A 54 N/A 29.1 N/A 22
N/A 57 N/A 18.5 N/A 4.50 N/A 50.26 N/A 54 N/A 37.1 N/A 30
N/A 57 N/A 22.23 N/A 6.03 N/A 36.26 N/A 48 N/A 23 N/A Ø 15
N/A 57 N/A 21.56 N/A 5.34 N/A 36.26 N/A 54† N/A 23.1 N/A 12.5
N/A 57 N/A 21.93 N/A 5.71 N/A 36.26 N/A 54†† N/A 23.1 N/A 12.5
1 - 5 of 5 | Results Per Page | View |
1