Type-E Tapered Roller Bearings
categories-bearings-type-e-tapered-roller-bearin-2
Features:
• Available in shaft sizes from 1
• 1-3/16 to 7"and 35mm to 180mm
• Easy installation and maintenance
• Supplied from the factory in shaft ready condition
• Assembled, adjusted and pre-lubricated in advance for immediate use
• Dimensionally interchangeable with comparable competitive Type E units
• Tapered roller bearings with double-extended inner race
• Extended inner race has two locking collars
• Available with standard V-Guard™ Nitrile and Teflon Contact Seal or Balanced Labyrinth Seal
• Case hardened rollers and races
• 65° set screw spacing on locking collars
• Timken® tapered roller bearing inserts allow for a combination of radial and thrust loads
• Misalignment = .010" per foot of shaft
• Excellent thrust load capacity
• Close fit oversized collars act as flingers for additional protection in dusty or damp environments
• Rugged housings are made in the USA of Class 30 cast iron
• Standard grease operating temperature is up to 250°
• High temperature grease is available up to 350°
• For custom lubrication, please call the factory for more information
• Housings available in the standard painted finish. Powder coating in RAL or custom colors, Stainless Steel Powder
coating, Nickel-plating, Epoxy, Teflon and other coatings are available upon request
• Custom machining and design is available. Please call the factory for further information
• Made in the United States /Asset/Type E 2 Bolt Pillow Block.jpg
Features:
• Available in shaft sizes from 1
• 1-3/16 to 7"and 35mm to 180mm
• Easy installation and maintenance
• Supplied from the factory in shaft ready condition
• Assembled, adjusted and pre-lubricated in advance for immediate use
• Dimensionally interchangeable with comparable competitive Type E units
• Tapered roller bearings with double-extended inner race
• Extended inner race has two locking collars
• Available with standard V-Guard™ Nitrile and Teflon Contact Seal or Balanced Labyrinth Seal
• Case hardened rollers and races
• 65° set screw spacing on locking collars
• Timken® tapered roller bearing inserts allow for a combination of radial and thrust loads
• Misalignment = .010" per foot of shaft
• Excellent thrust load capacity
• Close fit oversized collars act as flingers for additional protection in dusty or damp environments
• Rugged housings are made in the USA of Class 30 cast iron
• Standard grease operating temperature is up to 250°
• High temperature grease is available up to 350°
• For custom lubrication, please call the factory for more information
• Housings available in the standard painted finish. Powder coating in RAL or custom colors, Stainless Steel Powder
coating, Nickel-plating, Epoxy, Teflon and other coatings are available upon request
• Custom machining and design is available. Please call the factory for further information
• Made in the United States /Asset/Type E 4 Bolt Pillow Block.jpg
Features:
• Available in shaft sizes from 1
• 1-3/16 to 7"and 35mm to 180mm
• Easy installation and maintenance
• Supplied from the factory in shaft ready condition
• Assembled, adjusted and pre-lubricated in advance for immediate use
• Dimensionally interchangeable with comparable competitive Type E units
• Tapered roller bearings with double-extended inner race
• Extended inner race has two locking collars
• Available with standard V-Guard™ Nitrile and Teflon Contact Seal or Balanced Labyrinth Seal
• Case hardened rollers and races
• 65° set screw spacing on locking collars
• Timken® tapered roller bearing inserts allow for a combination of radial and thrust loads
• Misalignment = .010" per foot of shaft
• Excellent thrust load capacity
• Close fit oversized collars act as flingers for additional protection in dusty or damp environments
• Rugged housings are made in the USA of Class 30 cast iron
• Standard grease operating temperature is up to 250°
• High temperature grease is available up to 350°
• For custom lubrication, please call the factory for more information
• Housings available in the standard painted finish. Powder coating in RAL or custom colors, Stainless Steel Powder
coating, Nickel-plating, Epoxy, Teflon and other coatings are available upon request
• Custom machining and design is available. Please call the factory for further information
• Made in the United States /Asset/Type E PIloted Flange.jpg
Features:
• Available in shaft sizes from 1
• 1-3/16 to 7"and 35mm to 180mm
• Easy installation and maintenance
• Supplied from the factory in shaft ready condition
• Assembled, adjusted and pre-lubricated in advance for immediate use
• Dimensionally interchangeable with comparable competitive Type E units
• Tapered roller bearings with double-extended inner race
• Extended inner race has two locking collars
• Available with standard V-Guard™ Nitrile and Teflon Contact Seal or Balanced Labyrinth Seal
• Case hardened rollers and races
• 65° set screw spacing on locking collars
• Timken® tapered roller bearing inserts allow for a combination of radial and thrust loads
• Misalignment = .010" per foot of shaft
• Excellent thrust load capacity
• Close fit oversized collars act as flingers for additional protection in dusty or damp environments
• Rugged housings are made in the USA of Class 30 cast iron
• Standard grease operating temperature is up to 250°
• High temperature grease is available up to 350°
• For custom lubrication, please call the factory for more information
• Housings available in the standard painted finish. Powder coating in RAL or custom colors, Stainless Steel Powder
coating, Nickel-plating, Epoxy, Teflon and other coatings are available upon request
• Custom machining and design is available. Please call the factory for further information
• Made in the United States /Asset/Type E Wide Slot Take Up.jpg
Type E 2-Bolt Pillow Bock Tapered Roller Bearings
(34)Features:
• Available in shaft sizes from 1
• 1-3/16 to 7"and 35mm to 180mm
• Easy installation and maintenance
• Supplied from the factory in shaft ready condition
• Assembled, adjusted and pre-lubricated in advance for immediate use
• Dimensionally interchangeable with comparable competitive Type E units
• Tapered roller bearings with double-extended inner race
• Extended inner race has two locking collars
• Available with standard V-Guard™ Nitrile and Teflon Contact Seal or Balanced Labyrinth Seal
• Case hardened rollers and races
• 65° set screw spacing on locking collars
• Timken® tapered roller bearing inserts allow for a combination of radial and thrust loads
• Misalignment = .010" per foot of shaft
• Excellent thrust load capacity
• Close fit oversized collars act as flingers for additional protection in dusty or damp environments
• Rugged housings are made in the USA of Class 30 cast iron
• Standard grease operating temperature is up to 250°
• High temperature grease is available up to 350°
• For custom lubrication, please call the factory for more information
• Housings available in the standard painted finish. Powder coating in RAL or custom colors, Stainless Steel Powder
coating, Nickel-plating, Epoxy, Teflon and other coatings are available upon request
• Custom machining and design is available. Please call the factory for further information
• Made in the United States /Asset/Type E 2 Bolt Pillow Block.jpg
Type E 4-Bolt Pillow Block Tapered Roller Bearings
(21)Features:
• Available in shaft sizes from 1
• 1-3/16 to 7"and 35mm to 180mm
• Easy installation and maintenance
• Supplied from the factory in shaft ready condition
• Assembled, adjusted and pre-lubricated in advance for immediate use
• Dimensionally interchangeable with comparable competitive Type E units
• Tapered roller bearings with double-extended inner race
• Extended inner race has two locking collars
• Available with standard V-Guard™ Nitrile and Teflon Contact Seal or Balanced Labyrinth Seal
• Case hardened rollers and races
• 65° set screw spacing on locking collars
• Timken® tapered roller bearing inserts allow for a combination of radial and thrust loads
• Misalignment = .010" per foot of shaft
• Excellent thrust load capacity
• Close fit oversized collars act as flingers for additional protection in dusty or damp environments
• Rugged housings are made in the USA of Class 30 cast iron
• Standard grease operating temperature is up to 250°
• High temperature grease is available up to 350°
• For custom lubrication, please call the factory for more information
• Housings available in the standard painted finish. Powder coating in RAL or custom colors, Stainless Steel Powder
coating, Nickel-plating, Epoxy, Teflon and other coatings are available upon request
• Custom machining and design is available. Please call the factory for further information
• Made in the United States /Asset/Type E 4 Bolt Pillow Block.jpg
Type E Piloted Flange Tapered Roller Bearings
(36)Features:
• Available in shaft sizes from 1
• 1-3/16 to 7"and 35mm to 180mm
• Easy installation and maintenance
• Supplied from the factory in shaft ready condition
• Assembled, adjusted and pre-lubricated in advance for immediate use
• Dimensionally interchangeable with comparable competitive Type E units
• Tapered roller bearings with double-extended inner race
• Extended inner race has two locking collars
• Available with standard V-Guard™ Nitrile and Teflon Contact Seal or Balanced Labyrinth Seal
• Case hardened rollers and races
• 65° set screw spacing on locking collars
• Timken® tapered roller bearing inserts allow for a combination of radial and thrust loads
• Misalignment = .010" per foot of shaft
• Excellent thrust load capacity
• Close fit oversized collars act as flingers for additional protection in dusty or damp environments
• Rugged housings are made in the USA of Class 30 cast iron
• Standard grease operating temperature is up to 250°
• High temperature grease is available up to 350°
• For custom lubrication, please call the factory for more information
• Housings available in the standard painted finish. Powder coating in RAL or custom colors, Stainless Steel Powder
coating, Nickel-plating, Epoxy, Teflon and other coatings are available upon request
• Custom machining and design is available. Please call the factory for further information
• Made in the United States /Asset/Type E PIloted Flange.jpg
Type E Wide Slot Take-Up Tapered Roller Bearings
(26)Features:
• Available in shaft sizes from 1
• 1-3/16 to 7"and 35mm to 180mm
• Easy installation and maintenance
• Supplied from the factory in shaft ready condition
• Assembled, adjusted and pre-lubricated in advance for immediate use
• Dimensionally interchangeable with comparable competitive Type E units
• Tapered roller bearings with double-extended inner race
• Extended inner race has two locking collars
• Available with standard V-Guard™ Nitrile and Teflon Contact Seal or Balanced Labyrinth Seal
• Case hardened rollers and races
• 65° set screw spacing on locking collars
• Timken® tapered roller bearing inserts allow for a combination of radial and thrust loads
• Misalignment = .010" per foot of shaft
• Excellent thrust load capacity
• Close fit oversized collars act as flingers for additional protection in dusty or damp environments
• Rugged housings are made in the USA of Class 30 cast iron
• Standard grease operating temperature is up to 250°
• High temperature grease is available up to 350°
• For custom lubrication, please call the factory for more information
• Housings available in the standard painted finish. Powder coating in RAL or custom colors, Stainless Steel Powder
coating, Nickel-plating, Epoxy, Teflon and other coatings are available upon request
• Custom machining and design is available. Please call the factory for further information
• Made in the United States /Asset/Type E Wide Slot Take Up.jpg
